Welcome to the Bittydesign store! Ultra low shipping rates to all the EU destinations and also overseas.
New ultra low shipping rates to all the EU destinations and also overseas. Shipping worldwide.
Our airbrush branded Bittydesign® Airbrushes comes with a 0.4 mm threadless nozzle designed for easy removal and maintenance and is equipped with a suction system for the color and a "dual action" lever with which you can separately control the air and color flow, pressing it adjusts the air supply while pulling it back controls the amount of color. Tested for a long time in our laboratories with intense daily use, the 'Michelangelo' airbrush is constantly used for our productions because it is very reliable and thanks to the quick coupling of the color bottle a lot of time is saved in changing between one color and another without any waste of paint.
Nozzle std. supplied with the kit: 0.4mm thread-free / Air Pressure range: 15~50PSI (1~3,5 bar) / Capacity of bottle: 35cc
This replacement needle is the standard one measuring 0.5mm supplied with the Michelangelo kit (#BDAIR-182S).
This replacement nozzle is the standard one measuring 0.4mm supplied with the Michelangelo airbrush kit (#BDAIR-182S); its particular threadless design makes it a strong point as disassembly and cleaning are very quick and easy to do every time.
This needle is "optional" and necessary when you mount the nozzle 0.3mm size on your Michelangelo bottle-feed airbrush. The needle and the nozzle need to be buy complementary.
NOTE: when you mount this needle be sure that nozzle 0.3 (#182S-00403) is mounted as well also its specific nozzle cup #182S-00203.
Recommended for users with medium/high airbrushing experience.
This cone nozzle is "optional", its 0.3mm size (compared to the cone 0.4mm supplied "standard" into the Michelangelo airbrush kit) will allow you to create finishes and shades of absolute precision.; its particular threadless design makes it a strong point as disassembly and cleaning are very quick and easy to do every time.
NOTE: with this nozzle it is also necessary to combine its specific needle #182S-01503 and also its nozzle cap #182S-00203
This cup is "optional" and necessary when you mount the nozzle 0.3mm size on your Michelangelo bottle-feed airbrush. The cup and the nozzle need to be buy complementary.
NOTE: when you mount this cup be sure that nozzle 0.3 (#182S-00403) is mounted as well also its specific needle #182S-01503.
Over time the use causes an inevitable wear of the parts and among these the sealing o-rings are no exception; their replacement can represent a real "cure-all" to restore the correct functioning of the airbrush at his best.
When cleaning and maintaining the Michelangelo airbrush (with solvent-based liquids) we recommend removing the O-rings to preserve their consistency and prevent them from drying out.
Set of 3 airbrush bottles - 2oz / 60ml capacity - For use with our Michelangelo bottle-feed dual-action airbrush.
Material: clear PVC / Content of the set: 3pcs
Set of 3 paint bottle adapters.
Material: PVC / Content of the set: 3pcs / Connector: plastic
Comfortable in the hand, it acts as a handle on the airbrush to relieve muscle tension. With 1/8 inch BSP threads, it can be attach directly onto airbrush which includes 1/8 inch BSP connector. The clear bowl allows a visual inspection of built-up moisture and evacuated through a spring-loaded release without taking the off the airbrush. It is the final defense to delivery dry and clean air to the airbrush, perfect for your professional airbrush work.
Built-in 5-Micrometre elements to filtrate moisture or water quickly. Colour: transparent / Material: ABS / Size: 6.3cm / Package Contents: 1x Mini Air filter
Nylon brushes are designed to clean your airbrush in the most effective way possible. The different brushes will ensure that you are able to thoroughly clean the inside of your equipment from dried paint and/or debris.
5 nylon brushes sizes included, about 10cm length. Bristles: 3cm.
The length of this air hose is 1,8mt (6ft)
An indispensable Accessories for airbrush artist - beginner or professional
The project was born from the desire to transform the experience and artistic talent of Bittydesign® founder into a complete range of products to be offered to airbrushing enthusiasts from all over the world, be they professionals or amateurs.
The basic idea before the project took shape was simple: to give our customers exactly the same products that we ourselves use every day, our know-how made available to everyone through a line of airbrushes and accessories tested and refined over the last 2 years. Hence the expression "By painter to painters" because this is what it is, from us to you, this goal was possible thanks to the identification of the right partner to collaborate with in order to offer enthusiasts products that meet our high quality standards.